Saturday, 13 August 2011

More parts

Before and after shots of the air cleaner, after vapor blasting.
Before and after shots of the crank case, after vapor blasting
Two screws we had to make, on the carburetor manifold.
Loos part's going off for Cadmium plating.
We have had to take apart the tank so that we can get all the rust out! And fix all the rust holes! Not looking forward to this one.

Side cover undergoing sanding step's. At each grit level, all traces of mark's must be gone. For deep marks the process starts with a body file.
More before and after on crankcases after vapor blasting.

No comments:

Post a Comment